Allegion
Terms of Use
Privacy Policy
Frequently Asked Questions
Ask your question
Entering your question as a complete sentence will provide more accurate results than keywords or phrases.
User questions
FAQs
Category List
“
vonduprin standard finishes
”
RELATED FAQS
Question
Answer
What are the LCN standard finishes?
Resolution:
White Powder Coat can be ordered as a special RAL finish with a metal cover.:
STANDARD FINISH
Resolution:
626 Satin Chrome:
What is the part number for a blade stop shim for a 6111 or 6113 electric strike?
Resolution:
010055-xx is the part number for Blade Stop Shim kit for 6111 or 6113 electric strike and it must be ordered separately. xx is for the finish callout.:
When were 313AN & 315AN anodized finishes changed to SP313 (695) and 622 powder coat finishes?
Resolution:
Beginning December 6, 2010, all 33A, 35A, 98 & 99 devices ordered as 313AN Anodized was furnished in SP313 (dark brown powder coat). All devices ordered as 315AN ...:
Warranty information on Allegion Commercial products.
Resolution:
See here for our Warranty Information. :
Is the Von Duprin 88 exit device available in 609 Antique Bronze finish?
Resolution:
No, the Von Duprin 88 is available in US3, US4, US10, US10B, US26, and US26D finishes. It is also available in US3A, US4A, US15, 643e, and sprayed glossy black (SPBLK). :
Does Von Duprin offer the 88 exit device in US5 finish?
Resolution:
No, Von Duprin does not offer the 88 or 55 exit device in US5 finish. :
Can the fire label be replaced on a Von Duprin device?
Resolution:
The UL fire label is only applied to the device center case cover at the factory when the device is built. This label can not be sold or replaced with a new one. A ne...:
What is the 689 finish?
Resolution:
The BHMA standard 689 is an Aluminum finish, and is silver/gray in color.:
What finishes should be used on exit devices near the ocean or in saltwater environments?
Resolution:
Von Duprin Exit Devices (33A/35A, 98/99, etc) are handled on a case by case basis regarding their ability to handle salt and chemical environments. Our powder coated finishes US28 (Anodized Alum...: