Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ von duprin exit device cylinder ”

Resolution: The ALK uses a 1 1/4" mortise cylinder with straight cam. (NO DOGGING):

What are the part numbers for the Schlage blocking rings?

Resolution: After selecting the correct blocking ring, specify the thickness. The table below shows the different thicknesses that the rings are offered in. &...:

Can I use CD and ALK on a 98/99 series Von Duprin?

Resolution: Standard 98/99 exit alarm ALK devices are available with cylinder dogging option as of October, 2011. The device can be ordered standard with cylinder dogging and exit alarm ALK opti...:

What is the part number for the Schlage thumbturn rim cylinder?

Resolution: The rim cylinder with thumbturn, XB11-979 (Figure 1) was designed to be installed on the inside head of the Von Duprin 98/99–2 double cylinder exit devices, see Figure 1. The rim cylinder with...:

Does the cylinder cam get inverted on the SD option for the Von Duprin 99 exit device?

Resolution: The cylinder cam must be inverted with the SD option to work properly.:

Do the Falcon exit devices have the double cylinder option?

Resolution: A double cylinder(-2) option is not available on a Falcon device but is available from Von Duprin.:

Can the CD cylinder dogging and RX switch be ordered with 33/35 or 98/99 exit device?

Resolution: This can be done ONLY with non fire rated exit devices.:

Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ von duprin exit device cylinder ”

RELATED FAQS