Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ straight cam measurements ”

Resolution: Effective July, 2014, there is no longer a specific modular cam part number for dogging. The Schlage modular straight cams come with two mounting holes that allow for the cams to be mounted inverte...:

What is the standard FSIC mortise housing with a straight cam?

Resolution: 20-059 is the standard straight cam FSIC housing only used with Von Duprin, Monarch, and other straight cam applications. 30-032 is the straight cam FSIC housing only for the outside of the Schl...:

What cams do we use on the L9060?

Resolution: The straight cam should be installed on the outside cylinder and the clover cam on the inside.:

What type of cylinder is the 20-001?

Resolution: The 20-001 is a conventional mortise cylinder with a straight cam, compression ring and spring for use on rose trim. For use with the L9060 outside cylinder or other straight cam applications.:

What is the standard Falcon cam?

Resolution: Cams for other applications may be specified with no additional charge, see pricebook.:

What Schlage cam will operate Sargent locks?

Resolution: Click here for a list of available Schlage cams comparable to the Sargent 13-0660. :

Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ straight cam measurements ”

RELATED FAQS