Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ stilie width for l series locks ”

RELATED FAQS

Resolution: BAA/ARRA stand for Buy American Act and American Recovery and Reinvestment Act. A brief description of some of the federal requirements can be found in the BAA Catalog on the Allegio...:

How to build an L-Series chassis.

Resolution: This Step-by-Step guide is specifically designed for the functions listed below, however, it can be referenced with a majority of L series functions since most of the parts are ...:

What are the minimum stile and rail dimensions for the L-Series door FG, FG2 & FG3?

Resolution: The minimum stile and rail dimensions are to exposed glass are: Stiles = 6 13/16" Top Rails = 6 3/4" Center Rails = 7 1/2" Bottom Rail = 10 3/4" For high traffic and high abuse locations th...:

What is the minimum stile for Schlage locks?

Resolution: The minimum stile for each lock will depend on the backset and the rose diameter/escutcheon width. See the Schlage Minimum Stile Requirements for the minimum stile for eac...:

What is the part number for a L mortise lock spindle?

Resolution: The Schlage L-Series mortise lock spindle and spring part number can be found in the Table 1. Spindles and Springs Part Number Description L283-060 Spindle and spring, 1...:

Is there a round corner armor front for the L series mortise lock?

Resolution: The L series armor fronts are only available with square corners. :

What parts are needed to install an L lock on an 1 3/8" door?

Resolution: The standard L9000 lock can be ordered for thin doors (1 3/8") and the appropriate parts will be shipped. The LV9000, L400, LM9000, Anti-Ligature, and N escutcheon trims a...: