Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ steelcraft l-series fbc number ”

Resolution: FBC Approvals: Yes, Steelcraft doors do meet the Florida Building Code (FBC) Protocols (TAS 201, TAS 202 & TAS 203) Missile impact & ASTM E-330 applications Dade County NOAs: Yes,...:

What are the minimum stile and rail dimensions for the L-Series door FG, FG2 & FG3?

Resolution: The minimum stile and rail dimensions are to exposed glass are: Stiles = 6 13/16" Top Rails = 6 3/4" Center Rails = 7 1/2" Bottom Rail = 10 3/4" For high traffic and high abuse locations th...:

What Steelcraft products have been tested in accordance with SDI's Acoustical Testing Standard #SDI 114?

Resolution: SDI 114 is no longer published as an SDI performance standard. The new SDI standard for acoustical Performance is SDI 128-09Steelcraft does offer products that have been tested in accordance with S...:

Are steel stiffeners required in all door constructions?

Resolution: No, steel stiffeners are not required in Hollow Metal doors, they are one of many optional core available.Per ANSI/SDI A250.8 and ANSI/HMMA 867, core construction are optional offeri...:

Are stainless steel doors and frames available?

Resolution: Yes, stainless steel doors and frames are available. Door Construction: LS-Series: Visible edge seams Door construction similar to the ...:

What door meets FBC / NOA Zone 4 requirements?

Resolution: H-Series doors in single leaf applications with only mortise locks meet the FBC / NOA Zone 4 requirements?3070 max flushOutswing & Inswing applicationsZone 4 requires 120 to 170 psf.:

Is Rigid Cellular Polyisocyanurate Foam Core the same as Urethane Core?

Resolution: Polyisocyanurate foam (polyiso) is modified polyurethane foam but offers greater dimensional stability over a wider service temperature range.Polyisocyanurate foam is specifically formulated to pro...:

What Steelcraft doors can be prepped for a Von Duprin InPact device?

Resolution: Steelcraft L-Series and T-Series doors are available (as an option) factory prepared for the Von Duprin InPact exit device. :

What are the door cores A, B, C, D, E & F per SDI 100?

Resolution: These references are from an old and outdated SDI 100 specification. The new specification SDI 100 ANSI A-250.8 does not contain letter designations for core material. Core constructions designat...:

What are the different door cores available?

Resolution: The five most common cores are honeycomb, polystyrene, polyurethane, steel stiffened, and temperature rise. Honeycomb core doors are used for interior and exterior openings where high thermal...:

Available kits to convert classroom mortise locks to classroom security locks.

Resolution: Schlage has conversion kits to convert the classroom L/LV9070 to the classroom security L/LV9071 and the classroom holdback L/LV9076 to the classroom security holdback L/LV9077. The...:

What is the part number for a L mortise lock spindle?

Resolution: The Schlage L-Series mortise lock spindle and spring part number can be found in the Table 1. Spindles and Springs Part Number Description L283-060 Spindle and spring, 1...:

What are the part numbers for the inside and outside knobs for the L series?

Resolution: Inside knob and bushing: 09-402 plus design and finishOutside knob: 09-401 plus design and finish:

What is the L Series inside lever mounting plate part number?

Resolution: The inside lever mounting plate part number is L283-031.:

What is the part number for the L series handing screw?

Resolution: Screw part number is L583-485. Screw type: 8-32 UC-2A W/#6 Flat truss head Phillips recess, header point.:

Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ steelcraft l-series fbc number ”

RELATED FAQS