Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ steelcraft door handing ”

Resolution: Steelcraft does offer two types of seamless edge construction that support SDI classification standard Model 2 -seamless. Filled Edge: Epoxy fill, two part epoxy filled and dressed smooth. (LF, ...:

Does Steelcraft offer the doors and frames galvanized or galvannealed?

Resolution: Yes, Steelcraft does offer optional A60 and A40 Galvannealed, and G90 Galvanized steel on doors and frames. Galvannealed A60 and A40: A60 coating designation - optional on all doors and frame...:

What are Insulclad doors?

Resolution: Insulclad® entrance door systems are commercial aluminum entrance systems manufactured by Alcoa/Kawneer. Door panels include a layer (1/4" or 1/2" thick) of material added to the push side of ...:

Where is factory recommendation for location of an EPT?

Resolution: EPT installation guidelines are as follows: Recommended location is 6" below top hinge per template Steelcraft will locate the power transfer prep at the Von Duprin re...:

Does the SL-Series door have a square edge?

Resolution: The SL-Series door is a square edge non-handed door. A Hinge Filler (also referred to as Hinge Spacer) is the small removable trim part located on the door between hinge leaf and hinge reinforcem...:

What is a wicket door?

Resolution: Steelcraft does not manufacture a wicket door.:

Why won't the 5100 24v strike work on both a RH & LH door?

Resolution: The 5100 strike details are listed below: Only operates with 12VDC or 24VDC power supply. Will not operate with AC transformer. 12 or 24VAC can be converted to 12/24VDC using Von Duprin SO12 o...:

Does the old style 4030 have the same templating as the new style 4031?

Resolution: The old 4030 series was: Handed Mounted regular arm hinge side. Had sized springs, were not adjustable. The 4033 is an obsolete closer. If required, handing can be verified by looking at ...:

How do I determine the hand of a door?

Resolution: Go to the push side of the door opening. See above illustration. If door swings out to the left, it needs a left hand door closer. If door swings out to the right, i...:

What Steelcraft doors can be prepped for a Von Duprin InPact device?

Resolution: Steelcraft L-Series and T-Series doors are available (as an option) factory prepared for the Von Duprin InPact exit device. :

Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ steelcraft door handing ”

RELATED FAQS