Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ specification for falcon product ”

RELATED FAQS

Question
Answer
What is the thread on a mortise cylinder?
The thread spec on Schlage and Falcon mortise cylinders is 1.150 x 32
Does Allegion write specifications and specs?
Allegion does provides professional support to Architects and Design Professionals. For information related to specification development and support, Website for Architects and Design Professiona...
What are the Falcon T lock electrical requirements?
As of June 2011 the electrified T locks can support 12 or 24 Volts.  You do not need to specify 12 or 24 when ordering since the solenoid is capable of either voltage out of the...
Prior to June 2011 the T lock only supported 24V and the electrical requirements were as follows: 0.185 amp @ 24VDC Wire Gage 22 AWG See wiring diagram here - (Previous 2 wire versi...
What is the Falcon SZ-Series Door?
Falcon SZ Series Door is the economy Steelcraft commercial grade door recommended light commercial applications when architectural specification are not needed. Options: The SZ-Series door is...
What are the key height and spacing for Falcon standard and restricted keys and cylinders?
Falcon Standard Bitting Specs - 018 system Falcon Restricted Bitting Specs - 025 system
What BHMA Grade is the Falcon 25 Series exit device?
Falcon 25 series is a ANSI/BHMA A156.3 Standard for Grade 1 device.
Falcon F-25 series is the UL Rated Fire Exit Hardware device is a ANSI/BHMA A156.3 Standard for Grade 1 device.
A copy of the BHMA Directory Listing can be viewed in the online Certified Directory on the BHMA web site. BHMA
Where can I find hurricane ratings for Schlage and Falcon?
There are several Schlage and/or Falcon locks that have been tested and approved for this application. For Commercial use the locks have been tested and approved as assemblies wit...
How do you identify the model of a Falcon closer?
To determine the SC series, measure center to center on the closer body bolt hole mounting pattern and an overall description of the closer and arm. SC91 -- 6-3/8" x 3/4" -- unique arm SC93 -- 9-1...
Does Allegion assist with access control?
Allegion provides professional access control support to Security Consultants and Security Integrators.  For information related to specification development and support,Access Contro...