spacers for nde

RELATED FAQS

Question
Answer
There are several part numbers available: Part Number Contents 09-774 SFIC driver & Spacer N523-091 SFIC driver D500-000 Spacer
The ND lock can be installed on a 1 3/8" thick door by utilizing spacers, part number XN12-012.  These spacers are included with the lock when ordered for a 1 3/8" thick door.  The spacers can be o...
As of February 2016, ND locks began shipping with a new latchbolt. The new latchbolt offers substantially improved performance in adverse door conditions (ex, with heavy door loading) andis more ro...
Prior to February 2016, using ND-Series locks on hollow metal doors required the use of latch spacers which prevent the latch from "fishtailing" (back end of latch moving from side to side). Latch ...
Schlage B500The D500 series non-IC will fit onto a 1 3/8" thick door out of the box with no additional parts.The D500 IC option (B, BDC, GD, HD) requires a shim kit, 36-071 for use on 1 3...
Levers may sag due to an incorrectly installed springcage or an incorrect springcage.Mortise locks with a fixed (rigid) lever such as an L9080 will use a spacer on the rigid lever (outside) and a s...
The spacer (A508-640) is required to hold the cylinder in place due to the large size of the Orbit knob.
In the early cylindrical version of the AD-Series 993 locks, a spacer may be required for proper cylinder functionality.  Effected cylinder types are PD / LD / RD / JDIf a customer is ...
The SL-Series door is a square edge non-handed door. A Hinge Filler  (also referred to as Hinge Spacer) is the small removable trim part located on the door between hinge leaf and hinge reinforcem...
See image, ANSI A115.1 Mortise Lock PrepThis door prep requires the N escutcheon with the L283-029 spacer kit to keep the springcage from falling into the door.  Spacer kits are...
The LCN -61 Blade Stop Spacer is powder coated steel and measures 4" x 1 1/8" x 1/2" (overall dimensions).
The AL lock will be shipped with two spacers.  Use two spacers for 6-pin cores and use one spacer for 7-pin cores.
The part number for one spacer is D500-000.
The Schlage AL-Series SFIC locks require one (1) small format spacer (D500-000) for 7-pin cores and two (2) small format spacers for 6-pin cores.  When these spacers are not ins...
Fifth Screw, Parallel Arm Shoe, spacer
Shoe Spacer, Parallel Arm Closers, Aluminum Frame, Aluminum Store Front Frame