Allegion
Terms of Use
Privacy Policy
Frequently Asked Questions
Ask your question
Entering your question as a complete sentence will provide more accurate results than keywords or phrases.
User questions
FAQs
Category List
“
Setting lock code
”
RELATED FAQS
Question
Answer
How can the Von Duprin 98/9975-L with 996L classroom trim function be converted as a night latch function in field?
Resolution:
The following steps are required to convert the Von Duprin 98/9975L from classroom to night latch function: Order new 996L-NL-M trim and reset NL drive screw in mortise lockbody as se...:
On a HandPunch when the "Time and Attendance" mode is activated, how do you perform a "Department Code" Function?
Resolution:
On a biometric F-Series hand reader, if the "Time & Attendance" mode is activated:press your ID then #, choose from 1-IN 2-OUT 3-BACK (press either 1 or 2 or 3); the reader wi...:
How do I identify the old Falcon T lock chassis versus the new T lock chassis?
Resolution:
The Falcon T series was discontinued August 12th, 2026 and was replaced by the Falcon TM series. The date of manufacture printed on the chassis cover (see below), will determine if you have a ...:
Where can I find hurricane ratings for Schlage and Falcon?
Resolution:
There are several Schlage and/or Falcon locks that have been tested and approved for this application. For Commercial use the locks have been tested and approved as ...:
CM Lock Manual Programming Disabled
Resolution:
When trying to program a CM lock, it may display an error code with a solid green light and 10 read flashes. This indicates the lock has already been programmed with computer software and manual ...: