Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ senior swing switch ”

RELATED FAQS

Resolution: The 710095-00 (85445-900) and 84570-900 are the older Sr. Swing analog (non-digital) control. It is replaced by the current Sr. Swing digital control box. If you need to replace an old ...:

How do you get the digital read out to light up on the Senior Swing Control Box?

Resolution: There is a total of 4 red buttons on the front of the Senior Swing control box. To turn on the display, press and hold any 2 of the 4 red buttons at the same time for approximately 3-5 seconds. Y...:

What parts are needed to change a Senior Swing 9530 to a 9540 operator?

Resolution: To convert a 9530 to an 9540 you need to purchase the 9540-3077 REG push arm assembly for reveals up to 10” or 9540-3077L long arm for reveals from 10” to 20”.To convert a 9540 ...:

What is the difference between 4600 and Senior Swings from an application purpose?

Resolution: The 4600 is designed for an opening with (MOSTLY) manual traffic, and the (OCCASIONAL) automatic activation. The Senior Swing is designed for an opening with (MOSTLY) automatic activation, and (OC...:

Where does the 8310-877 safety sensor attach to the Senior Swing controller?

Resolution: The 8310-877 Bodyguard Safety Sensor attaches (plugs in) to the P1 connector on the Senior Swing controller. The 8310-846 (761462-00) wiring harness "included" with the 8310-877 safety sensor is us...:

What is the minimum and maximum reveal for a 9500(IQ) Series Senior Swing operator?

Resolution: The 9542(IQ), 9553(IQ), 9563(IQ) surface mounted Senior Swing(IQ) with a regular arm, mounted on the push side of the door, can handle a reveal from 1 1/8" up to 10".The 9542(IQ), 9553(IQ), 9563(IQ...:

Can you power an electric strike or maglock from the 9500 Series Senior Swing?

Resolution: An electric strike or maglock (24 volt only) can be wired to a Senior Swing 2800/9500 series operator using the P10 Lock Interface cable.For Current Sr Swing control boxes with ID# 72940 on th...: