Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ schlage door lever warranty ”

Resolution: When unlocking the CO200 door by mechanical key override, the green led will be continuously ON until the key is released. This will occur after firmware CO.A.6 (or later) has been installed int...:

What is the minimum dimension from the edge of the door to a glass light cutout?

Resolution: Minimum dimensions to cutouts for glass lights: Vertical edge of door to edge of cutout = 5 29/32" Top of door to top of cutout = 6" Bottom of door to bottom of cutout = 10" Reinforcing chann...:

Warranty information on Allegion Commercial products.

Resolution: See here for our Warranty Information. :

Where is the date of manufacture on a 4041 closer?

Resolution: The date stamp on a 4041/4040XP is on the packing nut. The date will be the week of the year and then the year. EXAMPLE: 10 05 would be week 10 of 2005. For example...:

Did Falcon ever make a lock for elevator doors?

Resolution: Falcon manufactured an EZF101 which was a large plate with a recessed lever for use in elevators. This item is no longer available. :

Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ schlage door lever warranty ”

RELATED FAQS