Allegion
Terms of Use
Privacy Policy
Frequently Asked Questions
Ask your question
Entering your question as a complete sentence will provide more accurate results than keywords or phrases.
User questions
FAQs
Category List
“
schlage compression ring
”
RELATED FAQS
Question
Answer
What are the part numbers for the Schlage blocking rings?
Resolution:
After selecting the correct blocking ring, specify the thickness. The table below shows the different thicknesses that the rings are offered in. &...:
What is the part number for the blocking ring for use without compression ring?
Resolution:
The part number for a Schlage mortise cylinder blocking ring for use without compression ring is the 36-079 (specify dimension and finish).:
What type of cylinder is the 30-001?
Resolution:
The 30-001 is a conventional mortise cylinder with a clover cam, compression ring and spring for use on rose trim. For use with the L9000 mortise locks except for the L9060 outside cylinder.:
What type of cylinder is the 20-001?
Resolution:
The 20-001 is a conventional mortise cylinder with a straight cam, compression ring and spring for use on rose trim. For use with the L9060 outside cylinder or other straight cam applications.:
How many compression anchors are provide per jamb on DW-Series frames?
Resolution:
For compression anchor details refer to the “ANCHORING SYSTEMS” section in the Steelcraft Tech Data Manual.Anchor Quantities: • 1 compression anchor per jamb through 9"depth • ...:
What cylinder and cam is used with the 650 series keyswitch?
Resolution:
If blocking rings (PN 36-079) are needed, specify dimensions when ordering. See below for blocking ring (PN 36-079) dimensions. Blocking RingSpecify Dimension 1//8" 012 3/16"&nb...: