rub plate

RELATED FAQS

Question
Answer
The rub plate comes standard with all bar type coordinators; COR32,42,52,60 and 72.
The Ives 482 does not come with a rub plate.  The brass 482 Door guard (also called 482B) comes with an edge guard or plate that is applied with adhesive to protect the edge of the door.T...
If the door hits the frame (or rubs on the rabbet of the head or jamb) the frame is out of square and improperly installed. Door edge rubbing on the rabbet - shimming the hinges may resolve the...
Monorail cutouts are typically the upper corner of door. Channels are cut to size welded into door held flush to cutout. We do not supply any covers or plates to finish.
The size monorail cutout is 8" wide x 24" high
Monorail cutouts are only available for non fire rated applications.
The 1260-18QF mounting plate is used to adapt the 1260 closer to the obsolete 1370 mounting hole pattern.
Falcon manufactured an EZF101 which was a large plate with a recessed lever for use in elevators.  This item is no longer available.     
It is not possible to mount a cylindrical lock less trim one side, however you can order the lock less components (like lever or rose).  If the customer is looking to mount the lever less trim, t...
  Schlage H-Series Escutcheons    Part Number  Description Dimension   07-057  Inside escutcheon and turn  6.92" x 2.75"  07-035  Inside escutcheon, dummy - H170  6.92" x 2...
Both adaptors are used on the B250 Series for doors prepped with a 2-1/8" bored hole instead of the 1-1/2" bored hole. 38-031 is a light gauge ring for use under a cylinder, diameter is 2 1/2" ...
Schlage offers professional lock training both at the factory and in the field.  Years of customer observation and feedback during training sessions is that when the anti-rotation plate is installe...
These items are not available from Schlage or Falcon. There are third party companies such as Don-Jo or Pro-Lok that manufacture cover plates.
The blank inside plate for the B661/761/861 is part number 12-626.