Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ rim exit thumbturn ”

Resolution: The rim cylinder with thumbturn, XB11-979 (Figure 1) was designed to be installed on the inside head of the Von Duprin 98/99–2 double cylinder exit devices, see Figure 1. The rim cylinder with...:

Can the CD and EL options be provided on the same 98/99 rim or vertical rod exit device?

Resolution: There is not enough room for both Cylinder Dogging (CD) and Electric Latch Retraction (EL or QEL) options because they both try to occupy the same space in the device.The dogging mechanism for cyli...:

How does the Von Duprin 98/99 rim or vertical rod exit device with lever trim convert from L to L-NL function?

Resolution: To convert the Von Duprin 98/99 Rim or Vertical (Rod or Cable) Exit Device with functional lever (996L-R/V) to act like a rigid lever (996L-NL-R/V) with key over ride follow these steps: R...:

How do you mount a 55 rim with the 379 where the studs do not line up with the mounting screws?

Resolution: Position the 379L trim and attach with countersunk screw into the bottom stud of the trim. Position the 55 Rim device and attach with the device mounting screw through the head of the de...:

What electric strikes are available for Von Duprin rim exit devices?

Resolution: The 22, 33/35A and 98/99 rim exit devices: The 6111 is the most common electric strike to be used with these devices 6112 and 6113 electric strikes also could be used The 6300 surface mount el...:

Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ rim exit thumbturn ”

RELATED FAQS