Allegion
Terms of Use
Privacy Policy
Frequently Asked Questions
Ask your question
Entering your question as a complete sentence will provide more accurate results than keywords or phrases.
User questions
FAQs
Category List
“
rim exit device double door strike
”
RELATED FAQS
Question
Answer
Is the Von Duprin 1609 strike fire rated for pairs of doors?
Resolution:
The Von Duprin 1609 cannot be used on a pair of fire rated doors. We recommend using the Von Duprin fire rated mortise exit device in lieu of the rim device such as the Von Duprin 5575-F,...:
What is the backset for a 98/99 rim device with a 1609 strike?
Resolution:
The backset for a 98/99 rim PANIC device with 1609 strike is 2 3/8" from center of the opening to center line of the device. See template :
What electric strikes are available for Von Duprin rim exit devices?
Resolution:
The 22, 33/35A and 98/99 rim exit devices: The 6111 is the most common electric strike to be used with these devices 6112 and 6113 electric strikes also could be used The 6300 surface mount el...:
What strike is used for a pair of doors with a Dor O Matic Rim device x Flushbolts on inactive door?
Resolution:
The STK45 strike is used on the inactive door leaf.:
Which strike do you use with an XP98/99 device?
Resolution:
The 1609 strike cannot be used with Von Duprin XP98/99 exit device.:
How do you mount a 55 rim with the 379 where the studs do not line up with the mounting screws?
Resolution:
Position the 379L trim and attach with countersunk screw into the bottom stud of the trim. Position the 55 Rim device and attach with the device mounting screw through the he...:
Why doesn't Von Duprin supply a template for the 6223 closed back double door electric strike showing all the different mortise locks it can be used with?
Resolution:
Per the template, as long as the latchbolt for the mortise lock or cylindrical lock is lined up with the centerline of the 6223 electric strike, it will function as required. Different offset...:
Does the Von Duprin 55 Rim device work with the Von Duprin 6111 electric strike?
Resolution:
Yes, but the strike must be ordered "special" and there is a "special" template to verify the 55 device is aligned properly for use with the Von Duprin 6111 electric strike. When ordering the...:
What cylinder is used for the Von Duprin 98/9975-2 devices?
Resolution:
The Von Duprin 98/9975 -2 device requires a RIM cylinder on the exit device side of the door and the outside trim requires a 1 1/4" mortise cylinder with straight cam. :
How do you route the wires for an E996L trim through the exit device?
Resolution:
The wires run through the device out to the EPT. See step 7 on page 5 of E996L instructions.:
How do I program my device?
Resolution:
The programming processes for Allegion devices can be both product and features specific. Some products programming processes are electronic in nature, others are physical in nature. &nb...:
What causes the top rod case to pull away from or strip out of the face of a steel door?
Resolution:
Hardware falling off a door is caused by one or all of the following issues: Field abuse Improper internal reinforcements in the door Improper field preparation The top or bottom rod case can...:
When are Panic Devices required?
Resolution:
The use of Panic Hardware and/or Fire Exit Hardware is required by the International Building Code (IBC) and NFPA 101 – The Life Safety Code, depending on which code and which edition of the code i...:
Do we make a blank trim plate to replace an existing trim?
Resolution:
We have several blank trims listed in the price book to cover existing trim prep in door. DEVICE EO TRIM 22 230EO 88 880EO 98/99 990EO or 996EO* 33A/35A Rim, 33/3...:
Where are hardware templates?
Resolution:
All the templates can be found at us.allegion.com Please click here :
Is the Von Duprin Guard-X exit device fire rated?
Resolution:
The Von Duprin Guard-X exit device is not fire rated because the deadbolt is not spring loaded. Therefore, there would be no positive latching as required on a fire rated opening. :
Can the Von Duprin 8827 latch be used for flush transom doors? Does Von Duprin make a strike for surface vertical rod devices with flush transom applications?
Resolution:
Yes, the Von Duprin model 260U strike is intended for surface vertical rod devices with flush transom applications. There is also a fire rated model called the 260U-F.:
Can I add a cylinder function to the 98/99 Rim EO device?
Resolution:
To add a cylinder to the 98/99-EO rim device order a 110NL-MD for metal door or 110NL-WD for wood door with a standard rim cylinder and prep the door per template.:
Why do the mounting studs on the 379L not line up with the back of the 55 rim?
Resolution:
The existing 373L control was modified and re-named as 379L to allow us to use the 55 rim device on an ADA door opening. The 379L control is our 373L with different hex ...:
What is the maximum door undercut for fire rated vertical rod exit devices?
Resolution:
For devices with bottom latches and strikes, the maximum undercut is 1/4" to ensure latching in the case of a fire. For devices approved without bottom latches and strikes, using the AFL (aux...: