Allegion
Terms of Use
Privacy Policy
Frequently Asked Questions
Ask your question
Entering your question as a complete sentence will provide more accurate results than keywords or phrases.
User questions
FAQs
Category List
“
rim cylinder prep schlage fsic
”
RELATED FAQS
Question
Answer
What is the part number for the SFIC rim cylinder driver?
Resolution:
The Schlage SFIC rim cylinder driver is part number B520-365, shown below. Figure 1: SFIC Rim Cylinder Housing:
What is the maximum door thickness a Rim cylinder can fit on?
Resolution:
For total thickness measurements larger than 3 inches see the special cylinder offerings in the Schlage Pricebook. Specify the part number and include the total thickness. We do no...:
Which way is the tail piece of the rim cylinder is inserting into the Von Duprin 98/99 rim device from 996L trim?
Resolution:
The tailpiece of the rim cylinder can be inserted into the Von Duprin 98/99 rim device either vertical or horizontal.:
DOUBLE CYLINDER (RIM & MORTISE ONLY)
Resolution:
99-2:
Is the Falcon Doromatic 2090 EO device ready to accept an exterior rim cylinder for key entry or hold back?
Resolution:
Yes, the Falcon Doromatic 2090 EO is ready to accept an exterior rim cylinder for key entry or hold back if desired.:
What cylinders are used to operate Von Duprin devices?
Resolution:
If unclear whether mortise, rim, or key-in-lever is needed, reference links below to determine what cylinder type is needed. In order to determine cylinder type n...:
Which cylinders were not affected by the modular design change?
Resolution:
The following list of cylinders were not affected by the change to modular cylinder: 09-900, 09-904, 09-905, 09-907 mortise cylinder turnsSmall format interchangeab...:
Does Von Duprin supply the 9875, 9975, 9875-F and 9975-F mortise exit devices with NL-OP trim function?
Resolution:
For night latch function with pull by others, the 98/99 series mortise exit device should be ordered as NL less trim, e.g., 9875NL-L/TRIM. We will furnish a device only, and the mortise cyl...:
Does Von Duprin offer a classroom security option with visual status indication?
Resolution:
Von Duprin offers two options: The CDSI/HDSI Dogging Indicator provides an at-a-glance verification of the status of the door from inside of the room. Visible “LOCKED” and “UNLO...:
What cylinder is used for the Von Duprin 98/9975-2 devices?
Resolution:
The Von Duprin 98/9975 -2 device requires a RIM cylinder on the exit device side of the door and the outside trim requires a 1 1/4" mortise cylinder with straight cam. :
How does the 98-2 or 99-2 double cylinder function affect the outside lever trim?
Resolution:
Double cylinder (-2 or -2SI) features an inside key cylinder which locks or unlocks the outside trim and an outside key cylinder which retracts the latch bolt only (Night latch function). Thi...:
Can you use a new 812L on an old bar that had a 182L?
Resolution:
The current 812L trim will replace the older 182L trim. Due to the thicker escutcheon plate of the 812L trim a 1 1/2" mortise cylinder with straight cam for mortise devices or a longer rim cylinde...:
What type of cylinder is a 20-022?
Resolution:
Both cylinders are standard non-ic rim cylinder. 20-022 has a horizontal tailpiece 20-021 has a vertical tailpiece:
When did the modular cylinder launch?
Resolution:
Modular cylinder was launched July 26, 2010 and replaced the standard key-in-lever, mortise, and rim cylinders. For a list of cylinders not affected by the modular cylinder design change cli...:
Is there a cylinder that can trap a key?
Resolution:
This product was available until 2001 when it was discontinued. Part Number Description XB09-728 Entrapment mortise cylinder, P keyway XB09-834 Entrapment rim cylinder, P keyway ...:
What parts are required to add a cylinder to the 1790 EO?
Resolution:
You will need a 1790NL/HB cylinder assembly (part number CYLASY.1151) and a rim cylinder.:
What cylinder length options are available?
Resolution:
There are different mortise cylinder length options depending on the cylinder type. Below is a list of available options for conventional, FSIC, and SFIC cylinders, as well as the convent...:
Is a standard cylinder keyway such as "C" available in SFIC?
Resolution:
It is not possible to key SFIC and standard cylinders including Schlage FSIC into the same system. A keyway name may be shared between the two key fami...:
Will Schlage locks with a BD suffix accept a BEST SFIC core?
Resolution:
The Schlage B and BD cylinder suffixes designate less small format interchangeable core (SFIC) cylinder prep for the lock. Any SFIC, 6-pin or 7-pin, can be inserted into th...:
New FSIC driver info for the AL locks.
Resolution:
The new AL FSIC driver part number is A700-052. This driver snaps onto the back of the core similar to the ND, as opposed to it being assembled into the lock chassis with a retaining ring. Th...:
Can I get the RU series with a Schlage Full Size Interchangeable core?
Resolution:
The RU lock can accept a Schlage Full Size core, but the cylinder suffix must be specified as "J IC-SC" so the correct parts are supplied. The tailpiece will come with the lock. Example: RU581J IC-SC:
What is the part number for the latch adapter used with 1" face plates for 1-1/8" prep?
Resolution:
Schlage offers a face plate adapter to adapt 1" face plate to 1 1/8" door preparation, part number is A501-878. :
What is the part number for T lock tailpiece used with a conventional cylinder?
Resolution:
Refer to Table 1 for a list of T lock tailpieces for conventional cylinders. Table 2 shows IC tailpieces. Table 1: T lock conventional tailpieces Table 2: T lock IC tailpieces:
What is the distance between the two main prep holes on the H lock from Schlage?
Resolution:
The center to center distance is 4 inches.:
Does Falcon make a plate to cover holes when the door is prepped wrong?
Resolution:
These items are not available from Schlage or Falcon. There are third party companies such as Don-Jo or Pro-Lok that manufacture cover plates.:
Are parts still available for the Schlage interconnect G series lock?
Resolution:
The current interconnect lock, S200 series (available in levers only), will not fit into the same door preparation.:
Where can I find discontinued G lock templates?
Resolution:
Schlage G Series template locate here. :
Where are hardware templates?
Resolution:
All the templates can be found at us.allegion.com Please click here :
Can I get the T series with a Schlage Full Size Interchangeable core?
Resolution:
The T lock can accept a Schlage Full Size core, but the cylinder suffix must be specified as "J IC-SC" so the correct parts are supplied (including the tailpiece) Example: T581J IC-SC:
Can the CD and EL options be provided on the same 98/99 rim or vertical rod exit device?
Resolution:
There is not enough room for both Cylinder Dogging (CD) and Electric Latch Retraction (EL or QEL) options because they both try to occupy the same space in the device.The dogging mechanism for cyli...:
Does the 1790EO device ship with a nightlatch cylinder assembly?
Resolution:
The 1790EO does not ship with a cylinder assembly. If you wish to convert a 1790EO to NL or HB operation, then you will need the 179CA cylinder assembly and a standard rim cylinder. :
Can a 24-R, 24-V, 25-R, or 25-V device use just a cylinder on the pull side for NL-OP function?
Resolution:
This is possible. A rim cylinder with cylinder anchor plate is used (anchor plate provided with rim cylinder package). No other special components are required. Order device as NL-OP.&...:
Can the 88 device be ordered as NL-OP?
Resolution:
You would have to order the device as 88NL less trim, the device will be shipped as an 88EO. The EO device has an NL cam to accept a rim cylinder tailpiece. :
Does Schlage offer a Rim cylinder FSIC housing less core?
Resolution:
Rim cylinder housing only for SFIC is part number 80-129.:
Are Interchangeable cores compatible industry wide?
Resolution:
There are two types of interchangeable cores:Full size interchangeable cores - referred to by Schlage as (FSIC) also known by other manufacturers as Large Format Interchangeable Cores (LFIC)Each ma...:
Does the Schlage SFIC rim housings accept both 6 and 7 pin IC cores?
Resolution:
The Schlage small format interchangeable core rim cylinders 80-329, 80-159, 80-116, and 08-129 can accept 6 pin and 7 pin small format cores.:
What is the length of a Schlage rim cylinder?
Resolution:
The Schlage rim cylinder lengths are given below and were measured from the face of the cylinder to the back of the tailpiece. Because of allowable tolerances for each part the average length is l...:
What is the part number for the Schlage small format rim cylinder tailpiece?
Resolution:
B502-899 is the tailpiece for both the SFIC and standard rim cylinders.:
What is the part number for the Schlage thumbturn rim cylinder?
Resolution:
The rim cylinder with thumbturn, XB11-979 (Figure 1) was designed to be installed on the inside head of the Von Duprin 98/99–2 double cylinder exit devices, see Figure 1. The rim cylinder with...:
Can I add a cylinder function to the 98/99 Rim EO device?
Resolution:
To add a cylinder to the 98/99-EO rim device order a 110NL-MD for metal door or 110NL-WD for wood door with a standard rim cylinder and prep the door per template.:
What is the tailpiece and driver part number for the 20-057?
Resolution:
The B220-001 is an FSIC rim tailpiece and driver.:
What cylinder does the 512 TP NL use?
Resolution:
A 1-1/8 through 1-1/2" mortise cylinder with straight cam per Step 4 of 512NL Instructions.:
Do we offer a parts pack for modular mortise or rim cylinder?
Resolution:
See descriptions for the 09-992 thru 09-997 parts kits for modular mortise cylinders. The 09-998 is a kit for a rim cylinder. :
Can you add double cylinder to an existing 99 rim device?
Resolution:
The 98/99 rim device can be converted to double cylinder 98-2 or 99-2. Double cylinder features an inside key cylinder which locks or unlocks the outside trim (Classroom Function) and an outside...:
What cylinder is used for the Von Duprin -2 double cylinder function?
Resolution:
The 98/99 rim device can be converted to double cylinder 98-2 or 99-2.Double cylinder features an inside key cylinder which locks or unlocks the outside trim (Classroom Function) and an&n...:
How do I order an 88 rim to accept NL cylinder and pull by others?
Resolution:
Order the device as 88 NL less trim. The cylinder will be mounted to the face of the door. Use templates 10156 and 40015.:
What is (SD) Special Dogging?
Resolution:
SD is Special cylinder dogging in the center case of 98/99 rim and vertical rod non fire rated devices and is available with standard, EL, QEL, CX and ALK.: