Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ replacement battery for handheld ”

RELATED FAQS

Question
Answer
What is the low battery threshold for the AD and CO Locks?
Information on low battery threshold and nuisance delay is noted below: New firmware now has improved levels. - These are approximate values/levels which change with measurement meters and measure...
AD400/AD200/AD250 After ADFwPkg 2.17.0 - June 2011 4 Battery Holder New batteries = 6.2 VDC Low battery threshold is 4.7 VDC for SM & MT - and 3.7 VDC for MAG and PROX (USB stops working at 4...
    AD400/AD200/AD250 After ADFwPkg 2.17.0 - June 2011 8 Battery Holder New batteries = 12.4 VDC Low battery threshold is 7.2 VDC Critical battery threshold is 6.9 VDC Coin cell = new/...
CO2004 Battery Holder (ONLY) New batteries = 6.2 VDC Low battery threshold is 4.2 VDC Critical battery threshold is 3.9 VDC Coin cell = new/full is 3.0 VDC, low is 2.8 VDC
CO2504 Battery Holder (ONLY) New batteries = 6.2 VDC Low battery threshold is 4.2 VDC Critical battery threshold is 3.9 VDC Coin cell = new/full is 3.0 VDC, low is 2.8 VDC
  CO200 & CO250 Disable coin cell Nuisance delay and blink, With CO.A.7 and SUS 4.10.2 or newer for CO200 and CO250, you can use the SUS/HHD, under Lock Properties, Edit, to de-select, DISABLE, t...
Where can I order a Hand Held Device (HHD), Pidion, accessories?
Warranty on the HHD is one (1) year from date of purchase.  The battery for the HHD (Bluebird Pidion) is covered under warranty.   However, as the batteries are not available s...
Is a dead battery on the HHD covered under warranty?
The battery for the HHD (Bluebird Pidion) is covered under warranty.   As the batteries do not come separate, the entire unit must be replaced.
Warranty on the HHD is one (1) year from date of purchase.
If unit is out of warranty, battery can be purchased here.
If other HHD accessories are needed, please see 76747 for links.
After replacing the battery on a Von Duprin 2670 Guard X why would the horn stop working?
Replacing the battery on the 2670 should not cause the unit stop working. Make sure the spring that provides tension on the plastic finger is not bent out. The spring should be at a 90 degrees...