Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ push side mounted closer vs pull side ”

RELATED FAQS

Resolution: A 1260 Pull Side can be mounted standard template for 180°, frame and trim permitting.:

What is the difference between an LCN CUSH arm, and an LCN EDA arm?

Resolution: EDA ARM - The EDA arm is a heavy duty parallel arm mount. The degree of door opening is determined by the template used for mounting. EDA arm closers can only be mounted as a Push Side parallel ar...:

Can I use a Glynn Johnson 410 with a 4040 regular (pull side) mount?

Resolution: ST-1630 is required when mounting a 4041 or 4040XP door closer regular (pull/hinge) side with a concealed GJ100 or GJ410 series over head stop.:

What are Electro-hydraulic Automatic Operators?

Resolution: Electro-hydraulic Automatic Operators are: Designed for manual opening applications where there is occasional need for automating the door to meet ADA requirements. Electrically powere...:

What are Pneumatic Automatic Operators?

Resolution: Pneumatic Automatic Operators are used in areas where electrically operated devices are not convenient or permitted. Consists of a modified, heavy-duty door closer for manual oper...:

What would cause my door closer to try and open the door instead of closing it?

Resolution: For a door closer that tries to open the door instead of closing it:The closer body could be mounted backwards on the door - check instructions for proper closer orientation.It could be the wrong h...:

Where is the RA closer reinforcement located on a frame for a Regular Arm Closer?

Resolution: Optional closer reinforcements are located at 3" from hinge jamb to the beginning of the reinforcement plate. This applies to Regular Arm, Parallel Arm, Top Jamb. Regular Arm (RA) closer reinfor...:

What side of the door is the 4040SE mounted?

Resolution: The 4040SE is non handed and can be mounted on the push or pull side of the door.Installation Instructions :

Is there a heavy duty arm available for the 4040 mounted pull side?

Resolution: ST2795 allows the the 4040 to be mounted pull side with a solid (heavy duty) arm.: