Allegion
Terms of Use
Privacy Policy
Frequently Asked Questions
Ask your question
Entering your question as a complete sentence will provide more accurate results than keywords or phrases.
User questions
FAQs
Category List
“
PULL OUT AUTOMATIC DOOR BOTTOM
”
RELATED FAQS
Question
Answer
Do automatic door bottoms (ADB) require Z49 end caps in order to use the optional “Pull Out” feature?
Resolution:
Do auto door bottoms require Z49 end caps in order to use the optional “Pull Out” feature? No, the Z49 end caps don’t have anything to do with the “pull out” function. They are a differ...:
What causes the top rod case to pull away from or strip out of the face of a steel door?
Resolution:
Hardware falling off a door is caused by one or all of the following issues: Field abuse Improper internal reinforcements in the door Improper field preparation The top or bottom rod case can...:
What are Pneumatic Automatic Operators?
Resolution:
Pneumatic Automatic Operators are used in areas where electrically operated devices are not convenient or permitted. Consists of a modified, heavy-duty door closer for manual oper...:
What are Electro-hydraulic Automatic Operators?
Resolution:
Electro-hydraulic Automatic Operators are: Designed for manual opening applications where there is occasional need for automating the door to meet ADA requirements. Electrically powere...:
Can automatic door bottoms be installed in standard Steelcraft doors?
Resolution:
Special (custom) option: a special/optional end channel that will support the following manufactures: National Guard (422/423/522) Pemko (443) Zero International (360/364).:
Can an auto operator be installed on a Dutch door?
Resolution:
Yes, an automatic operator can be installed on a Dutch door. The operator must be installed on the top leaf of the Dutch door. Only the top half will open unless the top and bottom leaves (se...:
What is the purpose of the magnet inside some of the Zero automatic door bottoms (ADB)?
Resolution:
The magnet assists with the door bottom staying in the "up" position. It takes a load off the mechanical components. It is only included on certain door bottoms (367, 368, 369) that are...:
Are the 321 and 323 automatic door bottoms handed?
Resolution:
Yes, these models have extension pieces on them such that you cannot just flip the complete unit over for different door handings. Since the brass adjusting nut must always be on the hinge si...: