Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ Printed Circut board ”

RELATED FAQS

Question
Answer
What is the part number for the pcb board on the 2670 Guard X exit device?
The following are part numbers for 2670 Guard X exit device PCB: pcb.10018 for English pcb.10019 for Spanish pcb.10020 for French
What firmware does my CO-100 lock have?
CO-100 now allows the PIN code length to be changed manually.  Each CO100 has a label that indicates its firmware revision.  Firmware revision 2.5.0 or higher support these...
CO-100 PIN length can range from 3 digits to 6 digits with firmware version 2.5.0 and higher.
Procedure to change PIN length: 1. Press {programming code (default is 97531)} then {*}.2. Press {99} then {*}, to enter Special Function Length Menu.3. Press {4} then {*}, to enter Pin Length M...
CO-100 now has NEW lock status reporting capabilities. Battery status, firmware version, hardware version and PCB serial number. See instructions below for these status menus.
Were the ALK PCB boards blue at one time?
No, the exit alarm ALK printed circuit board has been always green.
Does the ALK have 24vdc terminals on the circuit board?
The Von Duprin exit alarm ALK shipped after November 2010 are new style boards and can be identified by the 3 terminal blocks and LED.  Only these ALK will work with 24vdc power supply.
Can I bypass the circuit board on a M420 M450 or M490: Unsupported voids warranty