What firmware does my CO-100 lock have?

CO-100 now allows the PIN code length to be changed manually.  Each CO100 has a label that indicates its firmware revision.  Firmware revision 2.5.0 or higher support these new Status and modified PIN Length menu updates.  

CO-100 PIN length can range from 3 digits to 6 digits with firmware version 2.5.0 and higher.

Procedure to change PIN length:

1. Press {programming code (default is 97531)} then {*}.
2. Press {99} then {*}, to enter Special Function Length Menu.
3. Press {4} then {*}, to enter Pin Length Menu.
4. Press {3 - 6}, the number of digits in the PIN to be used.
5. Press {*}, to complete.



CO-100 now has NEW lock status reporting capabilities.

Battery status, firmware version, hardware version and PCB serial number. See instructions below for these status menus.






DISCLAIMER:

INFORMATION PROVIDED THROUGH THIS SITE IS PROVIDED TO YOU AS IS WITHOUT ANY EXPRESS REPRESENTATIONS OR WARRANTIES OF ANY KIND, AND WE MAKE NO REPRESENTATION OR WARRANTY THAT THIS SITE(OR ANY INFORMATION PROVIDED IN RESPONSE TO YOUR INQUIRY), WILL BE ACCURATE, COMPLETE, OR ERROR-FREE.

YOU AGREE THAT YOU MUST EVALUATE ALL INFORMATION AND RESPONSES, AND THAT YOU BEAR ALL RISKS ASSOCIATED WITH, THE USE OF THIS SITE, INCLUDING ANY RELIANCE ON THE ACCURACY,COMPLETENESS, OR USEFULNESS OF ANY INFORMATION OR MATERIALS MADE AVAILABLE THROUGH THIS SITE.

Other users ask