Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ power supply void exit device warranty ”

Resolution: See here for our Warranty Information. :

How many Von Duprin QEL devices can be connected to a power supply?

Resolution: Product Ordered before 7/10/2012 - Product identified by no label on QEL motor. You must use the 900-2Q option board with the PS900 power supplies to operate the QEL devices. The attached ta...:

What wire gauge and run is recommended for Von Duprin electric latch retraction EL device?

Resolution: :

What are the amperage and power supply requirements for the Von Duprin Chexit (CX) devices?

Resolution: Chexit motor driven devices shipped after 8-24-2015:You can use 1 Chexit device with PS902, 3 Chexit devices with PS904, and 4 Chexit devices with PS914 or PS906 power supplies with proper gau...:

How do you specify an exit alarm ALK with a hard wire to the power supply?

Resolution: All new 22, 33/35A and 98/99 series exit devices with exit alarm ALK option can be hard wired to the PS902 power supply as a standard feature.:

What power supply is needed for EL devices?

Resolution: You can use a Von Duprin PS914 power supply with any of the following option boards depending on the application. 900-2RS board will power 1 or 2 devices that do not require timing from pow...:

What power supply is required for two EL devices and one LCN auto operator?

Resolution: Von Duprin PS914 x 900-4RL supports two EL with two auto operator.:

Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ power supply void exit device warranty ”

RELATED FAQS