Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ plated finish thickness ”

Resolution: Steelcraft offers all the standard lights as well as special size glass lights in the H-series door. Effective April 1, 2012, (Bulletin # B-100.12) the default for Dezigner Trim in H-Series D...:

What is the minimum and maximum door thickness for the AD and CO series locks?

Resolution: The minimum door thickness that the AD or CO series lock will mount on is 1 3/8". Be advised that this will require additional spacers to be ordered separately to allow the lock to mount...:

How thick are Steelcraft door?

Resolution: All Steelcraft doors are a nominal 1 3/4" thick. Special door thicknesses are not available.:

What is the standard Steelcraft door thickness?

Resolution: 1 3/4" is the standard door thickness. Steelcraft only makes a nominal 1 3/4" thick door. A 1 3/8" was made for light duty commercial applications but that product was discontinued in 1999.:

What is the hinge backset for 1 3/4" thick door?

Resolution: Hinge backset is the dimension from the leading edge of the hinge to either the stop on the frame or to the stop face (push side) of the door. For operating clearance, the hinge backset on the d...:

Will 1 7/16" thick glass require a special rabbet size on borrowed light frames?

Resolution: Yes. 1 7/16" thick glass but a special rabbet size is required. The size of rabbet required for the frames would depend on the size of the glazing bead being used. For 1" wide glazing stops, ...:

What are the dimensions of the 5654 or 5754 mullion?

Resolution: 1-1/8" at door face, 2-3/8" at widest point, 3-1/2" depth, with 1/8" thick walls.:

What powder coat best matches US10B for a closer?

Resolution: The closest powder coat finish by LCN is Dark Bronze (BHMA 695).:

Is the EDA or Cush arm with threaded studs still available?

Resolution: ST-3195 is used to obtain the old style EDA or Cush arms which were assembled with threaded studs so that you could take apart the arm assemblies. Our current standard EDA and Cush arms are rivet...:

Are the 643e and 716 finishes the same?

Resolution: The commercial Aged Bronze finish (643e) is the BHMA equivalent to a copper plated, blackened, relieved and then clear coated product. This commercial finish is identical to the residential Aged ...:

What finish is brushed chrome?

Resolution: A 626 or US26D. Schlage definition of the 626 is a satin chromium plated finish.:

Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ plated finish thickness ”

RELATED FAQS