Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ Parts for modular cylinders ”

RELATED FAQS

Question
Answer
What is the part number for the dogged cam used in modular cylinders?
Effective July, 2014, there is no longer a specific modular cam part number for dogging. The Schlage modular straight cams come with two mounting holes that allow for the cams to be mounted inverte...
Do we offer a parts pack for modular mortise or rim cylinder?
See descriptions for the 09-992 thru 09-997 parts kits for modular mortise cylinders.  The 09-998 is a kit for a rim cylinder.      
What cam do Schlage mortise locks use?
The Schlage L-Series uses a clover leaf cam with the exception of the L9060 outside cylinder which uses a straight cam. The cam part number will depend on the type of mortise cylinder, keyway (for ...
How do I change my modular cylinder length?
A modular cylinder's length is determined by 4 basic parts; a cam screw, cam, plug extension, and a back housing.  Most of these parts are used in more than one cylinder length and...
Is there a service kit for modular cylinders?
A service kit is available, part number 40-223.  Product description available HERE. 
Which cylinders were not affected by the modular design change?
The following list of cylinders were not affected by the change to modular cylinder:    09-900, 09-904, 09-905, 09-907 mortise cylinder turnsSmall format interchangeab...
Cam screw loosening and falling off on modular cylinders.
There have been a few reported cases of the torx cam screw loosening on modular designs shipped prior to April 16th 2013.     History of cam screw changes: Standard s...