Allegion
Terms of Use
Privacy Policy
Frequently Asked Questions
Ask your question
Entering your question as a complete sentence will provide more accurate results than keywords or phrases.
User questions
FAQs
Category List
“
part # top cap
”
RELATED FAQS
Question
Answer
What is the part number for the end cap and bracket for the 22 device?
Resolution:
End cap without end cap bracket is 968601. End cap kit with bracket is 900981 End cap bracket is 971795-89:
How do you remove an AL lock from a door?
Resolution:
AL-Series and discontinued D Lever-Series locks use castle nuts to hold the chassis to the spring cages and to keep the chassis positioned in the door. This causes confusion at times when the lock ...:
Can the old style 3327 top latches and rods still be purchased?
Resolution:
The old style Von Duprin 3327 top latch and rod is longer available. The part number for old 3327 top latch was 105339.:
Will the 18-V top latch work with a 25-V device?
Resolution:
Yes, the top latch for the 25-V carried over from the 18-V device. Surface vertical rod top latch = part #650389 or #650375(fire rated):
What is the part number for 98/9927-F top latch less cover?
Resolution:
The part number for 98/9927/F top latch less cover is 050400.:
What is the part number for the former F588 from Monarch?
Resolution:
The top latch for a Fire rated surface vertical rod device is part #650375-00 which replaced the old part #F588.:
Is the end cap still available for the old style 33 device?
Resolution:
The old end cap for 33/35 is no longer available, use the new end cap part number 050014-xx.:
What is the part number for the 5547 top latch non rated?
Resolution:
The part number for 5547 top latch and rod assembly is 050053-00. :
What is the part number to replace a top or bottom latch of a 98/9927 device that was built before October 1998?
Resolution:
050090 for bottom latch retrofit kit and 050091 for top latch retrofit kit.:
Does a SEH require a door closer?
Resolution:
The SEH is an "electronic holder" (ONLY) that is used to hold open a Fire Rated opening. It requires a door closer to be mounted on the opposite side. It is normally used on an existing opening wit...:
Are top caps, bottom caps and/or astragals finish stained when factory attached on Graintech door?
Resolution:
When factory installed on GrainTech® doors: Finish Stain - YES, top caps, bottom caps and astragals are stained (prior to attachment) to match the GrainTech® door finish. GrainTech® Steel - NO, t...: