Allegion
Terms of Use
Privacy Policy
Frequently Asked Questions
Ask your question
Entering your question as a complete sentence will provide more accurate results than keywords or phrases.
User questions
FAQs
Category List
“
older co spring cage parts
”
RELATED FAQS
Question
Answer
What was the part number for the old D series levers spring cage?
Resolution:
The old D series springcage part numbers are as follows: C303-035 - Inside Springcage C303-036 - Outside Springcage These parts are no longer available.:
What is the part number for the springcage for an L9000 lock?
Resolution:
The springcage part number is L283-040.:
What are the part numbers for the ND lock spring cages?
Resolution:
ND-series locks manufactured before January 30, 2017 used the following spring cages::
Why can't a new spring cage or driver be installed on an older AL lock?
Resolution:
In 2002 the Schlage AL-Series underwent a design change that affected the spring cage, driver, and plastic insert. Spring cage and driver replacements for AL locks manufactured before this design ...:
What is the part number for the lever return spring for an old 182LE trim?
Resolution:
These parts are no longer available. For reference the spring part number is 4841 and the clip part number is 4326.:
Are the ND, NDe, AD and CO levers the same?
Resolution:
Between January 30, 2017 June of 2019, the AD and CO cylindrical lock levers were incompatible because of the ND / NDe lever and spring cage design change in January of 2017.Prior to January ...:
Why does my lever sag on an L9000?
Resolution:
Levers may sag due to an incorrectly installed springcage or an incorrect springcage.Mortise locks with a fixed (rigid) lever such as an L9080 will use a spacer on the rigid lever (outside) and a s...:
Why can't I get my JD YA6 cylinder to install into an AD-Series lock?
Resolution:
The JD YA6 tailpiece is intentionally designed such that the tailpiece cannot be installed at the same time as the cylinder. Interchangeable cylinders assume that the lever and taipiece is i...: