Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ older closer models ”

RELATED FAQS

Resolution: The 4330 / 4430 is an obsolete ME closer replaced by the 4310ME or 4410ME Series.:

Does LCN or Dor-O-Matic still make a floor closer?

Resolution: Neither Dor-O-Matic or LCN manufacturers a floor closer. :

How do you identify the model number and date code of an LCN cast iron hydraulic closer?

Resolution: The date is a 4 digit #. The first 2 numbers indicate the week it was made, and the last 2 numbers indicate what year it was made. On most surface mounted closers, the model #, date code, ...:

How do you identify the model of a Falcon closer?

Resolution: To determine the SC series, measure center to center on the closer body bolt hole mounting pattern and an overall description of the closer and arm. SC91 -- 6-3/8" x 3/4" -- unique arm SC93 -- 9-1...:

How do you identify what size a 2030 closer is?

Resolution: The Date Code and Closer Size are stamped in the backside of the closer body. These stamps will be on a smooth machined surface of the cylinder.Closer Size:If the number is "1", the...:

Where is the date of manufacture on a 4041 closer?

Resolution: The date stamp on a 4041/4040XP is on the packing nut. The date will be the week of the year and then the year. EXAMPLE: 10 05 would be week 10 of 2005. For example...:

Are there any parts available for the old Dor-O-Matic 1200 overhead concealed series closers?

Resolution: The Dor-O-Matic overhead concealed manual door closers have been obsolete since 1999, and there are no parts available for them.:

Does the old style 4030 have the same templating as the new style 4031?

Resolution: The old 4030 series was: Handed Mounted regular arm hinge side. Had sized springs, were not adjustable. The 4033 is an obsolete closer. If required, handing can be verified by looking at ...: