Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ old mortise cylinder ”

RELATED FAQS

What is the standard Falcon cam?

Resolution: Cams for other applications may be specified with no additional charge, see pricebook.:

Can you order the old non-modular mortise cylinder?

Resolution: We have completed our transition to the modular design and no longer have the old design.:

What Schlage cam will operate Sargent locks?

Resolution: Click here for a list of available Schlage cams comparable to the Sargent 13-0660. :

What type of cylinder is the 30-001?

Resolution: The 30-001 is a conventional mortise cylinder with a clover cam, compression ring and spring for use on rose trim. For use with the L9000 mortise locks except for the L9060 outside cylinder.:

What type of cylinder is the 20-001?

Resolution: The 20-001 is a conventional mortise cylinder with a straight cam, compression ring and spring for use on rose trim. For use with the L9060 outside cylinder or other straight cam applications.:

What cylinder does the 512 TP NL use?

Resolution: A 1-1/8 through 1-1/2" mortise cylinder with straight cam per Step 4 of 512NL Instructions.:

What cylinder is used for the Falcon 510L and 510L-NL trim?

Resolution: The Falcon Monarch 510L and 510L-NL trim will accept either a 1 1/4" Mortise cylinder with a straight cam or a 1 3/8" Mortise cylinder with a straight cam using the blocking ring provided with the ...:

What is the part number for the dogged cam used in modular cylinders?

Resolution: Effective July, 2014, there is no longer a specific modular cam part number for dogging. The Schlage modular straight cams come with two mounting holes that allow for the cams to be mounted inverte...: