Allegion
Terms of Use
Privacy Policy
Frequently Asked Questions
Ask your question
Entering your question as a complete sentence will provide more accurate results than keywords or phrases.
User questions
FAQs
Category List
“
non modular cylinders
”
RELATED FAQS
Question
Answer
Can the modular cams be used on the older cylinders?
Resolution:
The cams for modular cylinders are unique and are not compatible with any non-modular mortise cylinders, Schlage or any competitors.:
Can you order the old non-modular mortise cylinder?
Resolution:
We have completed our transition to the modular design and no longer have the old design.:
Which cylinders were not affected by the modular design change?
Resolution:
The following list of cylinders were not affected by the change to modular cylinder: 09-900, 09-904, 09-905, 09-907 mortise cylinder turnsSmall format interchangeab...:
What is the part number for the dogged cam used in modular cylinders?
Resolution:
Effective July, 2014, there is no longer a specific modular cam part number for dogging. The Schlage modular straight cams come with two mounting holes that allow for the cams to be mounted inverte...:
Do we offer a parts pack for modular mortise or rim cylinder?
Resolution:
See descriptions for the 09-992 thru 09-997 parts kits for modular mortise cylinders. The 09-998 is a kit for a rim cylinder. :
When did the modular cylinder launch?
Resolution:
Modular cylinder was launched July 26, 2010 and replaced the standard key-in-lever, mortise, and rim cylinders. For a list of cylinders not affected by the modular cylinder design change cli...:
Is there a Schlage modular cylinder sales kit?
Resolution:
Schlage has released a modular cylinder sales kit, part number 40-224. It's contents and information can be found here.: