Allegion
Terms of Use
Privacy Policy
Frequently Asked Questions
Ask your question
Entering your question as a complete sentence will provide more accurate results than keywords or phrases.
User questions
FAQs
Category List
“
nde spring cage
”
RELATED FAQS
Question
Answer
When did the ND series dummy spring cage change design?
Resolution:
On June 2, 2020 the spring cage on the ND series dummy functions changed design from a assembled machined spring cage to the new single cast spring cage. See pictures here : C...:
What are the part numbers for the ND lock spring cages?
Resolution:
ND-series locks manufactured before January 30, 2017 used the following spring cages::
Are the ND, NDe, AD and CO levers the same?
Resolution:
Between January 30, 2017 June of 2019, the AD and CO cylindrical lock levers were incompatible because of the ND / NDe lever and spring cage design change in January of 2017.Prior to January ...:
What is the part number for the lever return spring for the MA lock?
Resolution:
Lever assemblies part numbers are found in the Pricebook. Note they are handed.:
Why can't I get my JD YA6 cylinder to install into an AD-Series lock?
Resolution:
The JD YA6 tailpiece is intentionally designed such that the tailpiece cannot be installed at the same time as the cylinder. Interchangeable cylinders assume that the lever and taipiece is i...:
What is the part number for the springcage for an L9000 lock?
Resolution:
The springcage part number is L283-040.:
Why does the lever on my T lock lever droop?
Resolution:
Issue: One or both levers don't stay horizontal and droop down. Facts: Falcon T series locks in a high use application. Cause: Weak or broken springs within t...:
What was the part number for the old D series levers spring cage?
Resolution:
The old D series springcage part numbers are as follows: C303-035 - Inside Springcage C303-036 - Outside Springcage These parts are no longer available.: