Allegion
Terms of Use
Privacy Policy
Frequently Asked Questions
Ask your question
Entering your question as a complete sentence will provide more accurate results than keywords or phrases.
User questions
FAQs
Category List
“
MY DEAD BLOT STICKS
”
RELATED FAQS
Question
Answer
Does Steelcraft prime paint doors and frame?
Resolution:
All Steelcraft Frame, Door and Architectural Stick components will receive one coat of sprayed-on factory paint which is a baked-on, rust-inhibited primer that conforms to the industry standard ANS...:
What is the difference between an LCN CUSH arm, and an LCN EDA arm?
Resolution:
EDA ARM - The EDA arm is a heavy duty parallel arm mount. The degree of door opening is determined by the template used for mounting. EDA arm closers can only be mounted as a Push Side parallel ar...:
What would cause a 4600 Series operator to open up and intermittently stick open?
Resolution:
If manually it opens and closes fine, check to make sure one of the actuators is not getting stuck in the on position. Verify that the "Operating Indicator" LED's -- "POWER and SAFETY CLEAR" LED's ...:
Outside lever on the T and RU 571's won't unlock after egress.
Resolution:
Replace the lock chassis as necessary for any T locks exhibiting this issue. RU locks need to be replaced entirely. :
Falcon 19 R is sticking when I use the 914 KIL trim.
Resolution:
First, make sure the device is being tested while it is mounted to the door with trim installed. (Testing the device on the bench may show behaviors that will not occur once the d...:
Where are hardware templates?
Resolution:
All the templates can be found at us.allegion.com Please click here :