Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ mortise tail piece for sargent trim ”

Resolution: The tailpiece of the rim cylinder can be inserted into the Von Duprin 98/99 rim device either vertical or horizontal (using the tailpiece guide).:

What is the part number for T lock tailpiece used with a conventional cylinder?

Resolution: The Falcon T series was discontinued August 12th, 2026 and was replaced by the Falcon TM series. Refer to Table 1 for a list of T lock tailpieces for conventional cylinders. Table 2 show...:

Why will 912L not retract the latch bolt all the way?

Resolution: There are a few things to check in the 912L trim is not retracting the latch as expected. If the 912L was shipped after February 28, 2011, Check the installation ins...:

Will a 510L or 511L trim work for a vertical, mortise, concealed, or rim device when ordering the trim by itself?

Resolution: The "500" Series trim in general (510L, 511L, 512's, & 513K) will work with all 25 series devices and are not device specific.:

Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ mortise tail piece for sargent trim ”

RELATED FAQS