Allegion
Terms of Use
Privacy Policy
Frequently Asked Questions
Ask your question
Entering your question as a complete sentence will provide more accurate results than keywords or phrases.
User questions
FAQs
Category List
“
mortise housing for sfic
”
RELATED FAQS
Question
Answer
What cylinder and cam is used with the 650 series keyswitch?
Resolution:
If blocking rings (PN 36-079) are needed, specify dimensions when ordering. See below for blocking ring (PN 36-079) dimensions. Blocking RingSpecify Dimension 1//8" 012 3/16"&nb...:
Will the SFIC mortise housing accept both six and seven pin cores?
Resolution:
Yes. Both Schlage and Falcon SFIC mortise housings will accept 6 and 7 pin cores with no additional parts.:
Driver pins on SFIC mortise housings loosen up and fall out.
Resolution:
Issue: Schlage SFIC mortise cylinders have potential for the driver pins to fall out affecting the ability to lock and unlock the device.Facts: Housings manufactured between 06/01/2...:
What is the M504-413 tool used for?
Resolution:
See attachment that describes this tool.:
Does the Schlage SFIC rim housings accept both 6 and 7 pin IC cores?
Resolution:
The Schlage small format interchangeable core rim cylinders 80-329, 80-159, 80-116, and 08-129 can accept 6 pin and 7 pin small format cores.:
How to order the mortise full size interchangeable core with a construction core.
Resolution:
This only applies to the full size interchangeable cores. The SFIC mortise cylinders have part numbers for housings with construction cores (Disposable and Keyed). Simply add (-ICX) to the end o...:
What is the part number for the dogged cam used in modular cylinders?
Resolution:
Effective July, 2014, there is no longer a specific modular cam part number for dogging. The Schlage modular straight cams come with two mounting holes that allow for the cams to be mounted inverte...: