Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ mortise cylinder part number for chexit device ”

Resolution: Effective July, 2014, there is no longer a specific modular cam part number for dogging. The Schlage modular straight cams come with two mounting holes that allow for the cams to be mounted inverte...:

What type of cylinder is the 20-001?

Resolution: The 20-001 is a conventional mortise cylinder with a straight cam, compression ring and spring for use on rose trim. For use with the L9060 outside cylinder or other straight cam applications.:

Does the Von Duprin CD kit include the machined cover plate for the cylinder?

Resolution: The Von Duprin CD kit comes with the cover plate machined to accept the cylinder dogging mortise cylinder.1 1/4" mortise cylinder with an inverted straight cam is required for CD option on Von Dupr...:

What is the part number for a horn on the Chexit?

Resolution: If the horn fail to operate in the CX device you need to replace the Chexit module. 040086 is the part number for devices shipped after 8-24-2015 with motor driven.050228 is the...:

What is the part number for the CX-RX switch?

Resolution: For solenoid driven Chexit devices shipped from the factory prior to 8-24-2015, the RX switch is no longer available. This part was discontinued in 2019.If the RX Switch of a solenoid driven ...:

Is the Von Duprin Chexit part number 050228 a module or a kit?

Resolution: The circuit board is sometimes referred to as a "module" in the field.:

Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ mortise cylinder part number for chexit device ”

RELATED FAQS