Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ MORTISE CYLINDER FSIC ”

RELATED FAQS

Resolution: The 30-001 is a conventional mortise cylinder with a clover cam, compression ring and spring for use on rose trim. For use with the L9000 mortise locks except for the L9060 outside cylinder.:

Can the modular cams be used on the older cylinders?

Resolution: The cams for modular cylinders are unique and are not compatible with any non-modular mortise cylinders, Schlage or any competitors.:

What cylinder is used for the Falcon 510L and 510L-NL trim?

Resolution: The Falcon Monarch 510L and 510L-NL trim will accept either a 1 1/4" Mortise cylinder with a straight cam or a 1 3/8" Mortise cylinder with a straight cam using the blocking ring provided with the ...:

Does the Von Duprin CD kit include the machined cover plate for the cylinder?

Resolution: The Von Duprin CD kit comes with the cover plate machined to accept the cylinder dogging mortise cylinder.1 1/4" mortise cylinder with an inverted straight cam is required for CD option on Von Dupr...:

What non IC cam is offered by Schlage to work in a Falcon MA lock?

Resolution: Price Book 72A List Price $8.10:

Is the C987 a small format or full size core?

Resolution: The "C" indicates small format IC core, which is the only core style Falcon products. The C987 will be provided less core unless -6, or -7 suffix is specified (6 or 7 pin core) Example:...:

What Schlage cam will operate Sargent locks?

Resolution: Click here for a list of available Schlage cams comparable to the Sargent 13-0660. :

What is the part number for the dogged cam used in modular cylinders?

Resolution: Effective July, 2014, there is no longer a specific modular cam part number for dogging. The Schlage modular straight cams come with two mounting holes that allow for the cams to be mounted inverte...:

What is a modular cylinder?

Resolution: Click here for the Schlage Modular Cylinder Marketing Sell Sheet for information on the modular cylinder.:

What cam to use for a modular cylinder in Sargent mortise lock?

Resolution: The Sargent cams listed below work for all applications except 16 inside and 50 outside. The equivalent Sargent cam is the 13-0660. Use the B520-736 for modular cylinder lengths of 1 1/8",...:

Will the Von Duprin 376T control accept a 1 1/8" mortise cylinder?

Resolution: The Von Duprin 370 series control required a 1 1/4" mortise cylinder and will not operate with 1 1/8" mortise cylinder.:

What cylinder length do you use for escutcheon trim for the L series mortise lock?

Resolution: Typically for a 1-3/4" door you would use a 1-1/4" cylinder. Use the Table in the Pricebook for a reference:Note: The 30-001 used with Rose trim on double cylinder applications requires a Blo...:

What type of cylinder is the 20-001?

Resolution: The 20-001 is a conventional mortise cylinder with a straight cam, compression ring and spring for use on rose trim. For use with the L9060 outside cylinder or other straight cam applications.: