Allegion
Terms of Use
Privacy Policy
Frequently Asked Questions
Ask your question
Entering your question as a complete sentence will provide more accurate results than keywords or phrases.
User questions
FAQs
Category List
“
mortise cam screws backing out
”
RELATED FAQS
Question
Answer
What cam to use for a modular cylinder in Sargent mortise lock?
Resolution:
The Sargent cams listed below work for all applications except 16 inside and 50 outside. The equivalent Sargent cam is the 13-0660. Use the B520-736 for modular cylinder lengths of 1 1/8",...:
Can the modular cams be used on the older cylinders?
Resolution:
The cams for modular cylinders are unique and are not compatible with any non-modular mortise cylinders, Schlage or any competitors.:
What Schlage cam will operate Sargent locks?
Resolution:
Click here for a list of available Schlage cams comparable to the Sargent 13-0660. :
What is the part number for the dogged cam used in modular cylinders?
Resolution:
Effective July, 2014, there is no longer a specific modular cam part number for dogging. The Schlage modular straight cams come with two mounting holes that allow for the cams to be mounted inverte...:
What is the part number for a Schlage cam to operate a Corbin lock?
Resolution:
Schlage offers several Corbin Russwin competitor cams. The left most column in the image below describes what Corbin function the cam is used on and the additional columns show Modular,...:
Does the Von Duprin CD kit include the machined cover plate for the cylinder?
Resolution:
The Von Duprin CD kit comes with the cover plate machined to accept the cylinder dogging mortise cylinder.1 1/4" mortise cylinder with an inverted straight cam is required for CD option on Von Dupr...:
What mortise cylinder cam is needed for KR4023?
Resolution:
The KR4023 mullion requires a 1-1/4" mortise cylinder with straight cam. This is stated in box 7 on the first page of the KR4023 mullion instructions.: