Metal Doors Honey Cone Core

RELATED FAQS

Question
Answer
No, steel stiffeners are not required in Hollow Metal doors, they are one of many optional core available. Per ANSI/SDI A250.8 and ANSI/HMMA 867, core construction are optional o...
At this time, Allegion does not supply products with bullet resistant ratings.   Bullet resistant (BR) doors are designed to protect people and property from firearms’ bullets and shrapnel. ...
Yes, 4" butt hinge preparations are available as an option on hollow metal doors and frames as noted below: Hinge type: square corner with commercial hole pattern. Preparations for radius c...
Polystyrene Cores: The L-series door with polystyrene core insulation and the CE-series door have full slab polystyrene core.Polyurethane Cores: The L-series door with polyurethane core has honeyco...
All doors are tested in accordance with ASTM C1363 and SDI 113:B18 Series (Steel Stiffeners)     U-Factor = 0.50     R-Value = 2.01B16 Series (Steel Sti...
These references are from an old and outdated SDI 100 specification. The new specification SDI 100 ANSI A-250.8 does not contain letter designations for core material. Core constructions designat...
Door cores are available as follows: L-Series SL-Series and A14-Series Doors: Honeycomb core is standard Polystyrene core is optional Polyurethane core is optional CE-Serie...
Insulated Core Options: Steelcraft L-Series doors are available with the following 2 optional insulated cores: Polystyrene slab - this core is available in non fire rated and fire rated doors...
Steelcraft locates all butt hinges from the top of the door to the centerline of each hinge as standard practice: Locating hinges to the center line of the hinge keeps all hinge locations the sa...
1 3/4" is the standard door thickness. Steelcraft only makes a nominal 1 3/4" thick door. A 1 3/8" was made for light duty commercial applications but that product was discontinued in 1999.