Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ McKinney Swing Clear ”

RELATED FAQS

Resolution: The SEH is an "electronic holder" (ONLY) that is used to hold open a Fire Rated opening. It requires a door closer to be mounted on the opposite side. It is normally used on an existing opening wit...:

What is the difference between the FE and DE-Series frames

Resolution: A Double Egress frame is a double door frame prepared to receive two single-acting doors swinging in opposite directions (both doors are) the same hand. These openings are installed in cross corrid...:

Can we do TW on swing clear hinges?

Resolution: Swing clear hinges are available with TW (through wire).:

Can the bar style coordinators be used with swing clear hinges?

Resolution: No, the geometry of a swing clear hinge prevents the coordinator from working correctly. The bar style coordinator will not hold the active door open far enough for the inactive door to clear the ...:

Can you use a 4040SE with swing clear hinges on the pull side?

Resolution: Push Side Mount: Take the dimensions for the closer and track from centerline of swing clear hinge pin for the push side mount.:

What is the template for 5BB1HW for Swing Clear Hinges?

Resolution: The 5BB1HW Swing Clear Hinge templates can be found using this link.:

Can a 4010 be mounted with swing clear hinges?

Resolution: Locate closer and arm from the centerline of the swing clear hinge pin.:

Will a Senior Swing or Swing IQ work with swing clear hinges?

Resolution: Push Side Surface Mount Senior Swing or Swing IQ can be used with swing clear hinges, standard butt hinge/offset pivot templating. Pull Side Surface Mount Senior Swing&nb...:

What degrees of opening can a 4110 EDA be templated for?

Resolution: The 4110 EDA/HEDA can be templated for 100°, 140°, and 180° hold open. The hold open adjustment can be set to hold the door at any position (degree) up to the maximum door opening angle. For "Wi...: