Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ magnetic door holder ”

RELATED FAQS

Resolution: All the templates can be found at us.allegion.com Please click here :

Can I use a Glynn Johnson 410 with a 4040 regular (pull side) mount?

Resolution: ST-1630 is required when mounting a 4041 or 4040XP door closer regular (pull/hinge) side with a concealed GJ100 or GJ410 series over head stop.This ST also REQUIRES the use of a 4040-18TJ drop plat...:

What is a 4430 / 4330?

Resolution: The 4330 / 4430 is an obsolete ME closer replaced by the 4310ME or 4410ME Series.:

Schlage Control Locks - Do Battery Holders 47271341 Include Ribbon Cable

Resolution: No, the replacement battery holders for Schlage BE467 and FE410 locks do not include the thru-door ribbon cable. :

Does a SEH require a door closer?

Resolution: The SEH is an "electronic holder" (ONLY) that is used to hold open a Fire Rated opening. It requires a door closer to be mounted on the opposite side. It is normally used on an existing opening wit...:

What are Hold Open Closers & Magnets?

Resolution: Hold Open Closers & Magnets (Fire/Life safety products) provide a wide range of solutions. Single or multi-point hold open closers Utilize an electromechanical closer. Hold the door o...:

How do I get a special template for a Glynn Johnson overhead stop or holder with special door considerations?

Resolution: To determine if a Glynn Johnson overhead device will fit on a door with special considerations, we will need the following details: What overhead stop/holder series and size are you want...:

What mounting group do I use if my hinge type is not listed in the Glynn Johnson overhead door holder and stop instructions?

Resolution: To determine if a Glynn Johnson overhead device will fit on a door with special considerations, we will need the following details: What overhead stop/holder series and size are you w...:

DOOR HOLDER

Resolution: hardware; Suface Holder, Concealed Holder, Over Head Stop: