Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ m lever instalaltion ”

RELATED FAQS

Question
Answer
When was the SL1 lever & SK1 knob ligature resistant trim launched?
The SL1/SK1 was released in February 2011 for use on the L9000 mortise lock.
AD-993 - Cylinder loose in lever - Spacer missing
In the early cylindrical version of the AD-Series 993 locks, a spacer may be required for proper cylinder functionality.  Effected cylinder types are PD / LD / RD / JDIf a customer is ...
Will an AL lever fit onto an A-series lock?
The AL and A trim is not compatible with each other.
How do I remove the lever on an M lock?
To remove the M lock trim follow the steps below in reverse.       The M lock spanner wrench is 021415.  Although this wrench is no longer available from&n...
Does Von Duprin make a keypad lever trim?
Von Duprin used to offer a KP992L trim that was operating the 98/99 series exit devices but it was discontinued in mid 1990.  Von Duprin does not make a keypad trim any longer.
Why is the 613 finish is wearing off my lever?
Authentic oil rubbed bronze finish, or finish code 613 oil rubbed bronze will wear over time due to the “rubbed” finishing method which does not allow application of a protective coating or plating...
Is there a conversion kit to electrify the LP373L lever control?
There is not a conversion kit to electrify the LP373L lever control.  You need to order a complete E-LP373L-BE control through Engineering Specials.