Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ low energy auto operator ”

RELATED FAQS

Resolution: Automatic Operator, Auto Operator, Power Operator:

Why would a Falcon 8200 Series operator be blowing the fuse?

Resolution: If the Main AC fuse is blowing, the control box is defective and needs to be replaced. The "Main Fuse" is a (5x20MM) 1 Amp Slow Blow fuse. If the 12VAC fuse is blowing, verify they are not trying...:

What are Electro-hydraulic Automatic Operators?

Resolution: Electro-hydraulic Automatic Operators are: Designed for manual opening applications where there is occasional need for automating the door to meet ADA requirements. Electrically powere...:

How do I get service on my Astro Swing operator that isn't working properly?

Resolution: LCN does not does not have or supply any information for the old (obsolete) "High Energy" Dor-O-Matic Sliding doors, Bi-Fold doors or Astro Swing doors. You MUST be AAADM certified to work on, or g...:

What is the difference between the Senior Swing 9540 and 9530 Series power operators?

Resolution: The 9542 is the single door operator that mounts on the "push side" of the opening with a REG arm. The 9531 is the single door operator that mounts on the "pull side" of the opening with a STD arm...:

What is the input / output of the 8200 series operator?

Resolution: The Falcon 8200 series operator requires a input of 120 VAC @ 1 Amp.:

What would cause a Senior Swing to open too far?

Resolution: The Senior Swing operator is designed to power open the door to 90°. The built in dead stop (in the gearbox) prevents it from opening any further. If the Senior Swing operator is opening to far (pa...:

What is power boost on a Benchmark operator?

Resolution: Power Boost is a positive latching feature that increases the latch force, to over come building stack pressure or door weather stripping, etc, if the door stops before coming compl...: