Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ LCN mounting screws ”

Resolution: The part number for the 1460 cylinder mounting bracket is: 1460-30A.At the end of August 2016, this mounting bracket is packed in the closer Screw Pack. Please note it used to be shipped loos...:

What are the SRT screws lengths used with LCN Closers?

Resolution: SRT "Self Reaming, & Tapping" screws are the default type screws shipped with LCN closers, when a specific screw type is not specified. There are 3 standard lengths of SRT screws:1-3/...:

What size machine screws are used with thru bolts and a 2-3/4" thick door and a 4040 closer?

Resolution: A 4040 closer mounted with thru bolts on a 2-3/4" thick door would require 1/4-20 X 3-1/2" machine screws.:

What is the thread size on LCN thru bolts?

Resolution: The LCN Thru bolts accept 1/4-20 thread. LCN thru bolts are made of steel with zinc plating.:

Does LCN have Torx head wood screws?

Resolution: Torx head screws are only available as machine screws.:

What is the Buy American Act (BAA)?

Resolution: BAA/ARRA stand for Buy American Act and American Recovery and Reinvestment Act. A brief description of some of the federal requirements can be found in the BAA Catalog on the Allegio...:

What LCN closers are available in a tri-pack mounting?

Resolution: The 4040XP, 1260/1261, 1460/1461, 4030/4031 closers have the tri-pack mounting option when ordered with an Rw/PA or Hw/PA designation.:

How do you mount a 55 rim with the 379 where the studs do not line up with the mounting screws?

Resolution: Position the 379L trim and attach with countersunk screw into the bottom stud of the trim. Position the 55 Rim device and attach with the device mounting screw through the he...:

What are the part numbers for the mounting posts and screws for an L9000 lock?

Resolution: Mounting Posts Part Number Door Thickness L583-211 1 3/8" L583-212 1 3/4" - See note section on SL1 trim L583-213 2...:

How do you remove an AL lock from a door?

Resolution: AL-Series and discontinued D Lever-Series locks use castle nuts to hold the chassis to the spring cages and to keep the chassis positioned in the door. This causes confusion at times when the lock ...:

What is the part number for the armor mounting screws for the L lock?

Resolution: The part number is K110-020 (includes 2 screws). You will also need to specify the finish.:

Can LCN closers be installed outside in the elements?

Resolution: The LCN closers are not designed nor intended to be exterior mounted in the elements. :

Can a 4040XPT DE be used with a 4" reveal on the pull side?

Resolution: The LCN 4040XPT with a reveal deeper than 1/8" on the pull side of the opening requires a Double Egress (DE) arm.DE arms are handed arms and cannot have handing changed in field.ST3073 Standard 404...:

Can I mount an LCN Cush closer with an GJ overhead stop?

Resolution: It would be unnecessary to use the CNS/Cush arm and the Glynn Johnson overhead devices in the same application, both mechanisms stop the door.:

Do I need to order the LCN 4040XP closer X ST-3596 to get the cover screw to secure the snap on cover to the cylinder?

Resolution: As of June 27th, 2018--- the cover screw is now standard in the screw packs for the 4040XP, 4040XPT, 4000T, and 4040SE so ST-3596 is no longer needed. :

What length SRT screw is used for mounting the body of a 1461 closer?

Resolution: The SRT screw that is used for mounting the 1461 closer body is 1 3/8" long.Four screws are used to mount the closer body.:

Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ LCN mounting screws ”

RELATED FAQS