Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ LCN GJ co-ordination ”

Resolution: It would be unnecessary to use the CNS/Cush arm and the Glynn Johnson overhead devices in the same application, both mechanisms stop the door.:

Does LCN sell a coupler to stack two 4040XP closers together?

Resolution: LCN does not recommend this type of installation, and has never sold a coupler to do this.:

What special template (ST) is used with a 4040(XP) Rw/PA mount closer and a GJ overhead stop?

Resolution: The use of a 62A Shoe (required) would be used to mount a 4040XP Parallel Arm with a "SURFACE" GJ 70, 79, 81, 90, or 450 series stop. You would order the 4040XP with a Reg w/62A arm op...:

Can a 4040XPT DE be used with a 4" reveal on the pull side?

Resolution: The LCN 4040XPT with a reveal deeper than 1/8" on the pull side of the opening requires a Double Egress (DE) arm.DE arms are handed arms and cannot have handing changed in field.ST3073 Standard 404...:

Does the old style 4030 have the same templating as the new style 4031?

Resolution: The old 4030 series was: Handed Mounted regular arm hinge side. Had sized springs, were not adjustable. The 4033 is an obsolete closer. If required, handing can be verified by looking at ...:

What products are available with an antimicrobial finish?

Resolution: DESCRIPTION: The antimicrobial coating is specially formulated to inhibit the growth of bacteria by interrupting cell multiplication. The result is that the silver ions surround bacterial cells, ...:

Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ LCN GJ co-ordination ”

RELATED FAQS