Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ kick plate powder coated ”

RELATED FAQS

Question
Answer
Is the 8402 kick plate A or B label?
The 8402 kick plate is "A" label for metal doors and "B" for wood doors.
Can protective plates be attached to fire rated door?
Yes, Steelcraft doors we are approved up to 48" in height or not to exceed a total 2304 square inches per face. Protective plates are usually flat sheets of metal or plastic applied to one or both...
Can Steelcraft doors be powder coated?
Steelcraft does not offer factory powder coated doors and/or frames. Powder coatings usually require heat between 300 to 400 degrees to melt and cure the powder coat. The higher heat can ca...
What powder coat best matches US10B for a closer?
The closest powder coat finish by LCN is Dark Bronze (BHMA 695).
When were 313AN & 315AN anodized finishes changed to SP313 (695) and 622 powder coat finishes?
Beginning December 6, 2010, all 33A, 35A, 98 & 99 devices ordered as 313AN Anodized was furnished in SP313 (dark brown powder coat).  All devices ordered as 315AN ...
What are the LCN standard finishes?
The current Powder Coat finishes are: Aluminum (BHMA 689) Dark Bronze (BHMA 695) Brass (BHMA 696) Light Bronze (BHMA 691) Statuary Bronze (BHMA 690) Blac...
Tan Powder Coat can be ordered but only available as a special finish with a metal cover.
White Powder Coat can be ordered as a special RAL finish with a metal cover.
CUSTOM POWDER COAT
RAL, Finish, Special Finish