key cam assembly parts list

RELATED FAQS

Question
Answer
See here for standard ND Keycam part numbers and what functions they belong to.See here  for special ND Keycam part numbers and what functions they belong to. 
To convert from a ND95 to a ND75 remove the outside keycam and replace it with the N123-009 keycam.
To convert a Schlage ND80 to a ND70 you can replace the keycam or chassis and use your existing trim. Ordering Instructions: Keycam only: N123-010 Chassis and springcages: ND70LD LLL 626 LL...
Effective July, 2014, there is no longer a specific modular cam part number for dogging. The Schlage modular straight cams come with two mouting holes that allow for the cams to be mounted inverted...
1 1/8" mortise cylinders fit the 650 series keyswitch.  The 650 series keyswitch when ordered with the cylinder, will come complete with the correct cylinder, cam, and any required blocki...
If blocking rings (PN 36-079) are needed, specify dimensions when ordering. See below for blocking ring (PN 36-079) dimensions.  Blocking Ring  Specify Dimension  1//8" ...
The use of Panic Hardware and/or Fire Exit Hardware is required by the International Building Code (IBC) and NFPA 101 – The Life Safety Code, depending on which code and which edition of the code i...