Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ IS DOOR OPENING HARDWARE ALLOWED IN CLEAR OPENING WIDTH ”

RELATED FAQS

Resolution: Clear Opening Width for swinging doors is measured (with the door open 90 degree) from the face of door to stop soffit on strike jamb. &nbs...:

What is the minimum clear opening width required by ADA on a single door?

Resolution: The minimum clear opening width for ADA is 32" measured from face of door opened to 90 degrees to face of stop on strike jamb. There must be no hardware mounted to the door projectin...:

What are the minimum header lengths for a Senior Swing?

Resolution: The minimum header lengths for a Senior Swing with standard Spindle centers are:Concealed 2810 Series:2811 single door (offset pivot or butt hinge) -- 33".2811 single door with stop (cent...:

What is the minimum door opening width for mounting the 4640 or 4630 on a double door?

Resolution: The minimum door opening width (for mounting a pair of 4640 or 4630 operators on a double door) is 72" wide (2 - 36" door leaves). Mounting the 4640 or 4630 on a double door that is less than 72" w...:

What is the narrowest door a 99 rim, single door can fit on?

Resolution: The Minimum single door opening should be 26.32" and use the 299 or 499F strike.:

DOOR OPENING WIDTH

Resolution: Nominal opening width, Nominal Width:

What is the rough opening in walls for frame installations?

Resolution: For DW, K three sided frames and four sided borrowed light frames: Three sided frame = door opening width (order size) plus 1 1/2" minimum to 2" maximum and the door opening hei...:

What is the difference between the FE and DE-Series frames

Resolution: A Double Egress frame is a double door frame prepared to receive two single-acting doors swinging in opposite directions (both doors are) the same hand. These openings are installed in cross corrid...:

What is a Pocket Door Frames?

Resolution: POCKET DOOR FRAME: A frame designed to allow a door to slide inside a pocket located within the cavity of a wall. The hinge jamb of the frame is replaced with a 2 piece jamb without a stop. I...:

Can a 1460 EDA open to 180°?

Resolution: The standard 1460 EDA arm is not long enough to allow the door to open 180°.: