Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ interconnecting lock ic housing ”

RELATED FAQS

Resolution: See attachment that describes this tool.:

Does the Schlage SFIC rim housings accept both 6 and 7 pin IC cores?

Resolution: The Schlage small format interchangeable core rim cylinders 80-329, 80-159, 80-116, and 08-129 can accept 6 pin and 7 pin small format cores.:

Will the SFIC mortise housing accept both six and seven pin cores?

Resolution: Yes. Both Schlage and Falcon SFIC mortise housings will accept 6 and 7 pin cores with no additional parts.:

Why is the plug pulling out of the FSIC 23-030 mortise housing?

Resolution: ISSUE: After some use the plug will begin to project from the cylinder face and will ultimately pull completely out. ROOT CAUSE: In a dogged application the cam was rotated 180 degrees which ...:

What is the part number for a control pin for a 23-030?

Resolution: There are two parts that can be referred to as control pins for a 23-030 (FSIC core).C603-967 is the lower control pin that sits in the seventh hole of the FSIC plug. (part B in exploded view) ...:

Can I get the RU series with a Schlage Full Size Interchangeable core?

Resolution: The RU lock can accept a Schlage Full Size core, but the cylinder suffix must be specified as "J IC-SC" so the correct parts are supplied. The tailpiece will come with the lock. Example: RU581J IC-SC:

When ordering the ND lock less cylinder will it come with a tailpiece?

Resolution: The Schlage ND is shipped with a driver/tailpiece when ordered with a LD, BD, or JD suffix.: