Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ INSTRUCTIONS FOR MODULE ”

RELATED FAQS

Question
Answer
What is the Von Duprin Chexit module part number?
Part number for Von Duprin standard 15 sec. release Chexit module shipped after 8-24-2015 with motor driven is 040086-00. Part number for Von Duprin standard 15 sec. release Chexit module shi...
Is the Von Duprin Chexit part number 050228 a module or a kit?
The circuit board is sometimes referred to as a "module" in the field.
Is the power to the Von Duprin potted module polarized?
The power to the Von Duprin potted module also called potted circuit breaker is non polarized.
Are the EL wiring harnesses still required with the new potted module?
EL wiring harness is no longer needed with new EL potted modules.
Can a Chexit release delay time be changed in the field?
How do you test the potted circuit breaker or potted module on an EL device?
For Potted Modules (black color) shipped before August of 2012, you can test by applying power to the potted circuit breaker to and if good the following voltages will be seen (be careful...
Can the credential reader be changed on a CO-Series lockset?
On power-up the CO-Series locksets will provide 5 quick RED Schlage Button flashes and 5 quick beeps to indicate that the electronics (credential reader) has been changed.  In order to recover...
When/If the electronics (Credential Reader) changed on a CO-Series lockset, the lock will respond with 3 RED Schlage button flashes and 3 beeps for any key press or credential presentation.&nb...
CO Reader Modules cannot be replaced by Reader Modules with a different credential type; for example, a magnetic swipe credential reader cannot be replaced with a proximity credential rea...
A Credential Reader MAY be replaced with another Credential Reader of the same type; however, a Factory Default Reset must be performed before the lock will function properly.