Allegion
Terms of Use
Privacy Policy
Frequently Asked Questions
Ask your question
Entering your question as a complete sentence will provide more accurate results than keywords or phrases.
User questions
FAQs
Category List
“
hand punch ethernet
”
RELATED FAQS
Question
Answer
What punches are available to cut keys?
Resolution:
See tables below for available punches. KEY SECTION BLUE PUNCH Everest S*, C*, & Classic/Obverse* 40-075 Everest T* & ...:
What tools and pinning kits are required to service Everest 29 keys and cylinders?
Resolution:
The current tools, pinning kits and key originating machines for all Schlage Everest full size cylinders and small format cores are the same used on Everest 29.:
Why does a biometric hand reader display "Time restriction" ?
Resolution:
A biometric HandPunch will display "Time restriction" if you are trying to punch in or punch out outside of the times allowed for this. An employee will see the message, "Time restrictio...:
Is there a way to prevent an employee from making any type of punch (IN or OUT) during the lunch lockout period on a HP4000?
Resolution:
Yes, you can use a BACK Code list to control the type of punches that will be locked out until the timer has expired on any F-Series HandPunch that is break compliant. By using 00 a...:
Can I communicate via RS-232 to a Hand Reader if they have an EN-200 ethernet or MD-500 modem installed?
Resolution:
If a hand reader has an ethernet or modem card installed, the RS-232 port will be automatically configured as a printer output and RS-232 option removed from the SET SERIAL menu. In order to ...:
What is the "HOST BITS" setting on a Hand Reader with an Ethernet Module?
Resolution:
Handreaders require a static (fixed) IP address; this means you have to set its IP address, subnet mask and default gateway.These are usually assigned or issued by your local network administrator....:
Hand Reader just stops communicating via Ethernet?
Resolution:
When the Ethernet communications suddenly stop working on a biometric hand reader, there is the set of questions to ask the customer to start the troubleshooting process. They are detail orie...:
What should I do when my F-Series HandPunch is indicating "Memory Full"?
Resolution:
The F-Series HandPunch will display "Memory Full" when the number of transactions being stored on the hand reader exceed its memory capacity. When the memory capacity is exceeded, the hand reader...: