hand key same port

RELATED FAQS

Question
Answer
Yes, the ID3D does have a red/green LED light option.  It's used to indicate successful (green) or rejected (red) hand reads.  The part number is GL-100 and it can only be installed in th...
The HandKey II Command Mode Structure is used to access all menus in the HandKey. You hit clear and enter for the reader to ask ENTER PASSWORD if its a new reader. You hit clear and enter followed ...
This HandNet for Windows message appears only when a HandKey 2 connects to it for the first time.  During the uploading of users from the HandKey 2 to HandNet, the software verifies the user d...
 A F-Series HandKey II can be operated as a stand-alone access control station, as a network master enrollment station, or as a networked access control station which receives and processes co...
HandNet Lite is a no-cost application that can be found on the Access Control Support Disk.  The disk is included with every HandKey.  The application can also be obtained through an FTP ...
Yes, press the * (asterisk) key 10 times on the reader.  The serial number will be displayed.  A second way of locating the serial number on the reader is to visually check...
When you see an Error 64 on a HandKey or a HandPunch, it may mean that the lithium battery is low or there is a disconnect with main board.  The first step is to replace the lit...
The following technical note describes in detail the installation process for upgrading a biometric F-Series HandKey or a biometric F-Series HandPunch with a modem communications mod...
The following technical note describes in detail the process for upgrading a biometric F-Series HandKey or a biometric F-Series HandPunch main board with a new firmware chip. Note: A firmware upgr...
F-Series (Handkey and HandPunch) firmware upgrade
Prom Version Release Date Reader Type Model New Functions or Options Summary 265 2006 F-Series All Improvements to remove the occurrences of random resets on Ha...
When you see a Warning 80 or Warning 17 on a HandKey or a HandPunch, it may mean that the lithium battery is low.  The first step is to try a warm boot on the reader to see if that h...
A biometric F-Series hand reader usually comes with standard user memory.  When a user is added that exceeds that user memory size, there is no room left to store that user and that user template c...
The following technical note describes in detail the process for upgrading a biometric F-Series HandKey or a biometric F-Series HandPunch F1-style main board with additional RAM.  Please ...
The E-Series HandKey biometric product measures the size and shape of a user's hand to verify the person's identity for accessing a secured opening. The E-Series HandKey is an all-metal unit ...
SBT-HK1-day training course at an Allegion facility. User will be able to install, program and troubleshoot the hardware functions of the HandKey upon completion of the course.SBT-HK-ONSITE1-day tr...
To get the camera calibration values on a biometric F-Series HandPunch or F-Series HandKey, press the * (asterisk) key 11 times. It will display R (row), C (column), and E (exposure)...